Please Note: A $700 shipping fee is required and will be automatically added to your cart at checkout.

Scale wide-format DTF production with a complete powder application, curing, and training solution. The DTF Station Miro 64 DTF Shaker and Dryer Bundle with Supplies and Training combines the industrial Miro 64 DTF Powder Shaker and Dryer with Color Prime DTF Hot Melt Powder, Color Prime DTF Film Glide Eco, and on-site domestic travel training for the Epson G9070 and Miro 64. Designed for 64-inch DTF production, the Miro 64 delivers curing capacity up to 35 m²/h, flexible 64-inch or dual 24-inch media handling, 5-zone heat control with bottom heating, integrated fume management, and a practical 220 V single-phase power requirement.

This bundle gives production environments more than just a wide-format DTF curing system. It combines the Miro 64 shaker and dryer with two 1 kg bags of Color Prime DTF Hot Melt Powder and two 63-inch × 109-yard rolls of Color Prime DTF Film Glide Eco, providing essential DTF finishing supplies alongside the equipment. The result is a more complete solution for businesses scaling to industrial wide-format DTF production.

DTF Station Miro 64 Shaker & Dryer Walkthrough Video

Scale Wide Without Industrial Complexity

Scaling to 64-inch DTF production takes more than simply going wider. At higher production speeds, consistent curing, efficient powder handling, reliable workflow control, and practical installation become increasingly important. The Miro 64 is purpose-built for industrial wide-format DTF production, combining precision heating, integrated fume management, and flexible media handling in one platform.

With support for one 64-inch roll or two 24-inch rolls, the Miro 64 gives production teams more flexibility to match the finishing system to different DTF production requirements. Its two-section design also helps simplify shipping, site entry, and installation, while the 220 V single-phase configuration avoids the need for three-phase power.

Complete DTF Finishing Bundle

The Miro 64 bundle combines the shaker and dryer with Color Prime DTF powder and DTF film so your finishing system is paired with essential production supplies from the start. The included materials are sized for wide-format DTF workflows and complement the Miro 64's powder application and curing capabilities.

On-Site Training for the Epson G9070 and Miro 64

This bundle includes on-site domestic travel training for the Epson SureColor G9070 and DTF Station Miro 64. Designed to support the complete DTF production setup, the included training provides on-site instruction focused on the Epson G9070 printer and Miro 64 powder shaker and dryer.

Having training included with the bundle gives your team the opportunity to receive instruction on the Epson G9070 and Miro 64 together as part of the same production workflow, helping operators become familiar with the equipment and its operation.

Training Included

• On-Site Training: Training is provided on-site at your location.
• Domestic Travel Included: The training SKU includes domestic travel.
• Epson G9070: Training covers the Epson SureColor G9070 DTF printer.
• Miro 64: Training covers the DTF Station Miro 64 DTF Powder Shaker and Dryer.
• Complete Workflow: Training covers the Epson G9070 and Miro 64 as the core equipment in the wide-format DTF production setup.

Included Color Prime DTF Supplies

• Color Prime DTF Hot Melt Powder: Includes two 1 kg bags of white DTF hot melt powder for use in direct-to-film transfer production.
• Color Prime DTF Film Glide Eco: Includes two 63-inch × 109-yard rolls of DTF film for wide-format direct-to-film production.
• Production-Ready Bundle: Combines the Miro 64 finishing system with DTF powder and film in one package.

Color Prime DTF Hot Melt Powder

Color Prime DTF Hot Melt Powder is a key component of the direct-to-film transfer process. Applied over the printed DTF film before curing, the adhesive powder helps the finished transfer adhere during heat pressing.

The included bundle contains two 1 kg bags of Color Prime DTF Hot Melt Powder, giving production teams additional material for wide-format DTF workflows. The powder is formulated for DTF transfer printing on a variety of materials, including 100% cotton, polyester, nylon and more.

Color Prime DTF Powder Features

• Solid White After Baking: Cures to a solid white layer designed to help produce more vibrant transfer colors.
• Even Particle Distribution: Regular particles help provide consistent coverage and adherence.
• Fine-Quality Finish: Finely coated powder is designed to support smooth coverage and help minimize pinholes.
• Versatile Fabric Compatibility: Suitable for DTF transfers onto cotton, polyester, nylon and more.

Color Prime DTF Film Glide Eco

Color Prime DTF Film Glide Eco is included as part of this complete wide-format DTF production bundle. With a 63-inch width and 109-yard roll length, the included film is sized to complement the Miro 64's wide-format production capabilities.

The bundle includes two rolls of Color Prime DTF Film Glide Eco, giving production teams additional film for wide-format DTF transfer workflows. Its 63-inch width provides broad media coverage while maintaining compatibility with the Miro 64's wide-format finishing platform.

Color Prime DTF Film Glide Eco Features

• Wide-Format 63-Inch Roll: Sized for wide-format DTF production workflows.
• 109-Yard Roll Length: Provides substantial film capacity for production use.
• Two Rolls Included: The bundle provides two rolls of Color Prime DTF Film Glide Eco.
• Designed for DTF Production: Complements the Miro 64 powder application and curing workflow.

35 m²/h Wide-Format Production Capacity

The Miro 64 is designed to support demanding wide-format DTF production with curing capacity up to 35 m²/h, or approximately 377 sq. ft./h. This production capacity makes the Miro 64 a suitable finishing platform for compatible 64-inch DTF printers operating at high production speeds.

Designed for the EPSON SureColor G9070 / G9000, Mimaki TxF300-1600, and other compatible 64-inch DTF printers, the Miro 64 helps finishing capacity keep pace with wide-format DTF printing.

5-Zone Heating for Consistent Curing

The Miro 64 uses five-zone heating with bottom heat to provide controlled curing across the film width. Independent heat control helps maintain stable curing conditions as production speeds increase.

Patented bottom heating supports stable curing while helping reduce heat loss. The combination of multiple heating zones and bottom heat is designed to provide consistent curing across the wide film path.

Flexible 64-Inch or Dual 24-Inch Production

The Miro 64 gives operators multiple ways to configure production. Run one 64-inch roll for wide-format DTF production or use two 24-inch rolls when a dual-roll workflow better matches the job requirements.

This flexibility allows one finishing platform to support different production demands without requiring separate powder shaking and curing equipment for each workflow.

Integrated Fume Management

The Miro 64 features integrated fume management to help manage fumes generated during the DTF powder curing process. Integrating fume treatment into the finishing system helps create a more streamlined equipment setup without relying on separate external components for the primary fume management function.

Easy Site Entry and Installation

Industrial equipment does not have to mean complicated installation. The Miro 64 uses a two-section modular design that helps simplify shipping, site entry, and installation. The system is designed to pass through a standard 36-inch doorway, making it more practical for production environments where access can be a consideration.

The Miro 64 operates at 5.5 kW with AC 220 V single-phase power, providing an easier power setup compared with industrial finishing systems that require three-phase power.

Everything You Need on One Screen

The Miro 64 features a purpose-built operator interface that provides quick access to key production controls. Operators can manage important settings including temperature, paddle speed, powder drop, and fume extraction from one screen.

The user-friendly interface is designed to help operators learn the system faster, make adjustments with confidence, and reduce avoidable setup errors during daily production.

Compatible DTF Printers

• EPSON SureColor G9070
• EPSON SureColor G9000
• Mimaki TxF300-1600
• Other 64-inch DTF printers with production speeds up to 35 m²/h

Miro 64 Features & Benefits

• Increase DTF Production Capacity: Supports curing speeds up to 35 m²/h for demanding wide-format DTF production.
• 64-Inch Finishing Platform: Supports wide-format DTF workflows up to 64 inches.
• Flexible Media Handling: Run one 64-inch roll or two 24-inch rolls.
• 5-Zone Heating: Provides controlled curing across the film width.
• Bottom Heating: Patented bottom heating supports stable curing while helping reduce heat loss.
• Integrated Fume Management: Built-in fume treatment helps streamline the equipment setup.
• Easy Site Entry: Two-section construction is designed to simplify shipping, site entry, and installation.
• 36-Inch Doorway Fit: Designed to pass through a standard 36-inch doorway.
• Single-Phase Power: 5.5 kW, AC 220 V single-phase operation simplifies electrical integration.
• Operator-Friendly Controls: Temperature, paddle speed, powder drop, and fume extraction controls are accessible from one interface.
• Complete Bundle: Includes the Miro 64 shaker and dryer, two 1 kg bags of Color Prime DTF powder, and two 63-inch × 109-yard rolls of Color Prime DTF Film Glide Eco.

Miro 64 DTF Powder Shaker & Dryer Specifications

What's Included in This Bundle?