PremierArt ECO Elegance Clear Embellishing Gel Water Base for Inkjet Prints - 1 Gallon

PremierArt™ ECO Elegance is a water based embellishing gel used to give a personal touch to your inkjet prints. This non-yellowing gel will give an Impasto look to your canvas prints.

Brush Stroke look! The problem with Giclée and other fine art prints made from inkjet printers is the lack of the 3D look found on acrylic and oil paintings. These flat prints don’t have the same look and feel like original paintings do. Now with Elegance, you can add brushstrokes or enhance highlights. This embellishing gel goes on white and dries crystal clear to let the print color show through. You may also mix with acrylic paints to change surface colors. Easily applied with a stiff brush or pallet knife with no artistic skills required.

ECO Elegance Clear is available in 16oz, 32oz, 1 gallon and 5 gallon containers.

FACT: Coated prints last longer and look better! For more information visit www.ecoprintshield.com

***(Important: To get maximized results please follow the steps below. We recommend coating with PremierArt ECO Print Shield before application of Eco Elegance.)***

Application: After print is coated and stretched, Eco Elegance may be applied by Roller, brush or palette knife.

STEP 1 COAT: Inkjet Prints must be completely dry (minimum 24 hours) and then coated with PremierArt ECO Print Shield.

STEP 2 STRETCH/MOUNT: If canvas is to be stretched, it must be stretched before applying embellishing gel. If it will be mounted, this mounting must also be completed before application of Eco Elegance.

STEP 3 EMBELLISH: After the coating has completely cured and print is stretched or mounted, Eco Elegance can be applied with a brush, roller or palette knife. Eco Elegance must be applied in thin layers allowing the gel to dry between coats in order to remain clear. It can also be mixed with acrylic paints for color matching. This product is not compatible with oil based paints.