Search

Magic BROADVUE Outside Mount Perforated Window VInyl 54" x 100' Roll 3" Core

Magic BROADVUE Outside Mount Perforated Window VInyl 54" x 100' Roll 3" Core
Manufacturer: Dietzgen
Availability: Call for Availability
SKU: 71685
$449.07
decrease increase

Magic BROADVUE Outside Mount Perforated Window VInyl 54" x 100' Roll 3" Core

 

MAGIC BROADVUE is a 6 mil perforated, PVC window vinyl designed for exterior mounted window graphics. BROADVUE has a pattern of round, evenly spaced holes based on a 60/40% perforation allowing exterior mounted graphics to be seen from the outside but appear invisible from the inside. For sizing information please visit my.dietzgen.com.
 

Features & Benefits:

  • Removable and repositionable PSA
  • Superior water fastness
  • Indoor or outdoor use

 

Common Applications:

  • Tradeshow Graphics 
  • Retail Graphics 
  • Window Graphics
  • Door Graphics
  • Vehicle Graphics

 

Tips & Tricks:

  • Print on the white outside surface
  • Suggested heater settings for solvent/eco-solvent: 40˚ C – 45˚ C
  • Allow to completely dry before finishing
  • If stacking graphics use a silicone sheet between layers
  • Clear liquid laminates provide excellent surface protection
  • Apply to clean dry surface above 40˚F
  • Peel and fold back 1” of liner
  • Align to the surface and press the top edge down
  • Peel the remaining liner and use a squeegee to apply
  • Do not stretch

Magic BROADVUE Outside Mount Perforated Window VInyl 54" x 100' Roll 3" Core

 

MAGIC BROADVUE is a 6 mil perforated, PVC window vinyl designed for exterior mounted window graphics. BROADVUE has a pattern of round, evenly spaced holes based on a 60/40% perforation allowing exterior mounted graphics to be seen from the outside but appear invisible from the inside. For sizing information please visit my.dietzgen.com.
 

Features & Benefits:

  • Removable and repositionable PSA
  • Superior water fastness
  • Indoor or outdoor use

 

Common Applications:

  • Tradeshow Graphics 
  • Retail Graphics 
  • Window Graphics
  • Door Graphics
  • Vehicle Graphics

 

Tips & Tricks:

  • Print on the white outside surface
  • Suggested heater settings for solvent/eco-solvent: 40˚ C – 45˚ C
  • Allow to completely dry before finishing
  • If stacking graphics use a silicone sheet between layers
  • Clear liquid laminates provide excellent surface protection
  • Apply to clean dry surface above 40˚F
  • Peel and fold back 1” of liner
  • Align to the surface and press the top edge down
  • Peel the remaining liner and use a squeegee to apply
  • Do not stretch
Filters
Sort
display