DTF Station Transfer Film (Warm Peel) for Direct to Film 23.6"x109 Yard Roll
Availability: Call for Availability
DTF Station Transfer Film (Warm Peel) for Direct to Film 23.6"x109 Yard Roll
Features:
- High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
- Warm Peel: Peel off the film without a long wait after the first press.
- Single Side Matte: Easily distinguish the print side.
Compatible with:
Any DTF printer on the market - **Recommended use with a roll printer.**
Instructions:
1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo DTF Powder Shaker to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press, Option 1: Wait for 4-6 seconds and remove the film gently. Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently.
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
