Property Measurement Typical Value
Caliper, Face 2.0 mil (51 µm)
Caliper, Adhesive 1.0 mil (25 µm)
Dimensional Stability <0.015" (0.4 mm)
Note: Ink loads in excess of 250% may cause shrinkage and/or increased initial adhesion of the printed film.
Tensile at Yield 4.0 - 8.0 lb/in (0.7 - 1.5 kg/cm)
Elongation 200% min.
Gloss Hunter Gloss @ 60° 90 GU
Adhesion

LSE Plastics

LSE Clearcoats

LSE Paints

LSE Textured Substrates

Stainless Steel

4.1 lbs/in (718 N/m)

4.3 lbs/in (753 N/m)

4.5 lbs/in (788 N/m)

3.5 lbs/in (613 N/m)

5.5 lbs/in (963 N/m)  *LSE - Low Surface Energy

Flammability

ASTM E-84

Self Extinguishing
Shelf-Life 2 years from date of manufacture (stored at 68°–77°F / 20°–25°C and 50±5% R.H.)
Durability Vertical Exposure Up to 7 years - see ICS Documentation for printed durability
Min. Application Temperature 40° F (4° C) Flat
Service Temperature −40°F to 180°F (−40°C to 82°C) (Reasonable range of temperatures which would be expected under normal environmental conditions.)
Chemical Resistance Resistant to most mild acids, alkalis, and salt solutions
Compliance   California Proposition 65