Property Measurement Typical Value
Caliper, Face 2.0 mil (51 µm)
Caliper, Adhesive 1.0 mil (25 µm)
Dimensional Stability <0.015" (0.4 mm)
Note: Ink loads in excess of 250% may cause shrinkage and/or increased initial adhesion of the printed film.
Tensile at Yield 4.0 - 8.0 lb/in (0.7 - 1.5 kg/cm)
Elongation 200% min.
Gloss Hunter Gloss @ 60° 90 GU
Adhesion

Easy Apply

15 min 

24 hr

1 week

1.8 lbs/in (315 N/m)

2.1 lbs/in (367 N/m)

4.0 lbs/in (700 N/m)

Flammability

FMVSS 302

ASTM E-84

ASTM E-662

IMO FTP Code

Self Extinguishing
Class 1 or A rating
Pass
Pass
Meets the requirements Part 2 & 5 for all material categories
Shelf-Life 2 years from date of manufacture (stored at 68°–77°F / 20°–25°C and 50±5% R.H.)
Durability Vertical Exposure Up to 7 years - see ICS Documentation for printed durability
Min. Application Temperature 45° F (7° C) Flat
50° F (10° C) Flat w/Rivets, Corrugations
60°F (16° C) Complex curves and/or Watercraft
Passenger vehicles and watercraft keep at or above minimum application
temperature for as long as possible -- at least 12 hours is recommended.
Trailers and box trucks keep at or above minimum application temperature for
as long as possible - at least 12 hours is recommended.
Service Temperature −50°F to 180°F (−45°C to 82°C) (Reasonable range of temperatures which would be expected under normal environmental conditions.)
Chemical Resistance Resistant to most mild acids, alkalis, and salt solutions
Compliance   California Proposition 65