Property	Measurement	Typical Value
Caliper, Face	—	3.4 mil (86 µm)
Caliper, Adhesive	—	1.0 mil (25 µm)
Dimensional Stability	—	<0.035" (0.89 mm) Note: Ink loads in excess of 250% may cause shrinkage and/or increased initial adhesion of the printed film.
Tensile at Yield	—	9.0 - 15.0 lb/in (1.6 - 2.7 kg/cm)
Elongation	—	100% min.
Gloss	Hunter Gloss @ 60°	<16
Adhesion:	24 hr	(LSE = Low Surface Energy) LSE Plastics: 4.1 lbs/in (718 N/m) LSE Clearcoats: 4.3 lbs/in (753 N/m) LSE Paints: 4.5 lbs/in (788 N/m) LSE Textured Substrates: 3.5 lbs/in (613 N/m) Stainless Steel: 5.5 lbs/in (963 N/m)
Flammability	—	Self Extinguishing
Shelf-Life	—	2 years from date of manufacture when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.
Durability	Vertical Exposure	6 years
Opacity	—	99.6%
Min. Application Temperature	—	40°F (4°C)
Service Temperature	—	-40° to 180°F (-40° to 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions).
Chemical Resistance	—	Resistant to most mild acids, alkalis, and salt solutions. Resists exposure to fuel vapors and occasional fuel spills.