Property	Measurement	Typical Value
Caliper, Face	—	1.3 mil (32 µm)
Caliper, Adhesive	—	1.0 mil (25 µm)
Dimensional Stability	—	<0.015" (0.4 mm) Note: Ink loads in excess of 250% may cause shrinkage and/or increased initial adhesion of the printed film.
Tensile at Yield		4.0 - 8.0 lb/in (0.7 - 1.5 kg/cm)
Elongation	—	100% min
Gloss	Hunter Gloss @ 60°	DOL 1370Z - 30 GU
Adhesion	15 min 25 hr	3.0 lbs/in (525 N/m) 3.5 lbs/in (613 N/m)
Flammability	ASTM E-84	Self Extinguishing Class 1 or A rating
Shelf-Life	—	2 years from date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.)
Durability	Vertical Exposure	Up to 4 years. See ICS Performance Guarantee for printer specific durability
Min. Application Temperature	—	40° F (4° C)
Service Temperature	—	−40°F to 180°F (−40°C to 82°C) (Reasonable range of temperatures which would be expected under normal environmental conditions.)
Chemical Resistance	—	Resistant to most mild acids, alkalis, and salt solutions, including water. Resists Petroleum Vapors.
Compliance		California Proposition 65