Property	Measurement	Typical Value
Caliper, Face	—	6.0 mil (152 µm)
Caliper, Adhesive	—	1.0 mil (25 µm)
Dimensional Stability	—	<0.065" (1.651 mm) Note: Ink loads in excess of 250% may cause shrinkage and/or increased initial adhesion of the printed film.
Tensile at Yield	—	—
Elongation	—	—
Gloss	Hunter Gloss @ 60°	15
Adhesion:	15 min	1.0 lbs/in (175 N/m)
Removability	—	1 year from most substrates
Flammability	ASTM E84 Class 1 or A rating	Self Extinguishing
Shelf-Life	—	2 years from date on label (up to 2 years unprocessed, OR process within one year and apply within 1 year of processing)
Durability	Vertical Exposure	Unprinted: Up to 4 years Printed: Up to 3 years (Removable up to 1 year) Note: If abrasion or chemical resistance is required an overlaminate must be used.
Min. Application Temperature	—	40° (4°C)
Service Temperature	—	-40° - 180°F (-40° - 82°C) (Reasonable range of temperatures which would be expected under normal environmental conditions)
Chemical Resistance	—	Resistant to most mild acids, alkalis, and salt solutions.