| Ink Compatibility | Compatible with HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide XL pigment inks, and HP Latex Inks |
| Weight (with liner) | 289 g/m2 per ISO 536 Test Method |
| Thickness (with liner) | 304 microns/12 mil per ISO 20534 Test Method |
| Liner | 120 g/m², double-sided PE-coated silicone paper |
| Adhesive | Clear, removable, and repositionable adhesive |
| Removability | Up to 3 years removable/repositionable indoors |
| Opacity | >85% per TAPPI T-425 Test Method and ISO 2471 Test Method |
| Brightness | >97 per TAPPI T-452 Test Method |
| Whiteness | 118 per ASTM E313-98 Test Method |
| Finish | Matte |
| Slip Rating | In compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586) |
| Operating Temperature | 15 to 25° C / 59 to 77° F |
| Operating Humidity | 20 to 80% RH |
| Water Resistance | Moderately water-resistant |
| Wind Orientation | Print side out |
| Core Size | 3-in core with a removable 2-in core adapter |
| Dry Time | Immediate |
| Flame Resistance | B1, and ASTM E84 approved fire certifications |
| Lamination | For additional protection, liquid or spray coatings are recommended |
| HP PageWide XL Cutter | The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter |
| Shelf Life | 1 year, unopened in original packaging |
| Storage Temperature | 10 to 27° C / 50 to 80° F |
| Storage Humidity | 35 to 65% RH |
| Environmental | Adhesive fabric made with recycled water bottles2 and coating materials, REACH compliant |
| Finishing/Post Processing | Use a carbide knife for kiss and die cutting |
| Installation Tip | To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting. |
| Country of Origin | Product of China |
| Ordering Information | 5L2S6A 610 mm x 30,5 m (24 in x 100 ft) 5L2S7A 914 mm x 30,5 m (36 in x 100 ft) 5L2S8A 1067 mm x 30,5 m (42 in x 100 ft) 5L2S9A 1372 mm x 30,5 m (54 in x 100 ft) 5L2T0A 1524 mm x 30,5 m (60 in x 100 ft) |
1. Product consists of PET fabric and coatings. With liner attached, 72% by weight of the product consists of recycled content. Base material fabric is made from 100% recycled resin.
2. 100% of total PET resin in the product made from recycled water bottles. The coating does not contain recycled materials. Compliant with Global Recycled Standard (GRS) Version 4.0.
3. According to “The Ecology of Recycling,” published on United Nations website, UN Chronicle, see un.org/en/chronicle/article/ecology-recycling and “Reducing and Reusing Basics,” US EPA, March 2022, see https://www.epa.gov/recycle/reducing-and-reusing-basics.
4. B1, ASTM E84 approved fire certifications.
5. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, February 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)
6. Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up 3 months. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, February 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
7. Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence
8. For additional protection, we recommend Marabu ClearShield Professional Wall Armor.
9. See the HP REACH Declaration published at HP Printing Products and Consumable Supplies.