Search

DAF Speed Vinyl Reinforced Slip Resistant Pebble-finished Print Vinyl 54"x82' Roll

DAF Speed Vinyl Reinforced Slip Resistant Pebble-finished Print Vinyl 54"x82' Roll
Manufacturer: DAF
Availability: Call for Availability
SKU: RSPEEDVINYL-5482
$579.23
decrease increase

DAF Speed Vinyl Reinforced Slip Resistant Pebble-finished Print Vinyl 54" x 82' Roll

 

DAF Speed Vinyl is a one-step solution for short-term floor and wall graphics with no need for over-lamination or extra protection!

 

KEY FEATURES AND BENEFITS:

  • Product construction is designed for quick and easy production and install. No over lamination or additional protection required.
  • Surface: Matte textured pebble finish.
  • Slip Resistant, Passed UL 401 Standard.
  • Roll Put-up: 54”x82ft.
  • Adhesive High-Tac/removable solvent/acrylic.
  • Release liner 140gsm PE coated Silicon Paper.
  • Final tack 48 hours.

 

Compatibility:

Use with Mild & Eco-Solvent, UVC and Latex printers. (A pretest is always recommended.)

 

APPLICATION:

Promotional applications on surfaces like Sealed Floors and other indoor smooth surfaces. Product construction is designed for fast installation onto clean & dry surfaces. Minimum install temperature is above 50 degrees F. Rounded corners or soft-shaped graphics will be less prone to lifting. For uncommon or critical surfaces, a pretest is recommended. Not recommended for high textured surfaces.

DAF Speed Vinyl Reinforced Slip Resistant Pebble-finished Print Vinyl 54" x 82' Roll

 

DAF Speed Vinyl is a one-step solution for short-term floor and wall graphics with no need for over-lamination or extra protection!

 

KEY FEATURES AND BENEFITS:

  • Product construction is designed for quick and easy production and install. No over lamination or additional protection required.
  • Surface: Matte textured pebble finish.
  • Slip Resistant, Passed UL 401 Standard.
  • Roll Put-up: 54”x82ft.
  • Adhesive High-Tac/removable solvent/acrylic.
  • Release liner 140gsm PE coated Silicon Paper.
  • Final tack 48 hours.

 

Compatibility:

Use with Mild & Eco-Solvent, UVC and Latex printers. (A pretest is always recommended.)

 

APPLICATION:

Promotional applications on surfaces like Sealed Floors and other indoor smooth surfaces. Product construction is designed for fast installation onto clean & dry surfaces. Minimum install temperature is above 50 degrees F. Rounded corners or soft-shaped graphics will be less prone to lifting. For uncommon or critical surfaces, a pretest is recommended. Not recommended for high textured surfaces.

Filters
Sort
display